Toki: Custom Outdoor Roller Shades Made in Italy

Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Custom Toki Custom outdoor roller shade with cable guides

Toki is the custom outdoor roller shade we make in our own workshop in Italy. It closes off one side of pergolas, porches and balconies, giving you shade and privacy.

Custom, manual or motorized: it glides smoothly and stops at any height.
Tens-Flow technology: spring-tensioned cables and a weighted bottom bar; the fabric drops straight and stays taut, even in the wind.
Minimalist design: the bottom bar is concealed in a fabric pocket, and decorative covers hide the technical components.
Cable tensioners mount to the floor or the wall.
Waterproof Purishade® or breathable Braidd5® fabric, in ten colors.

Choose the manual version and you can add a motor later.

Get fabric samples delivered to your door Order your samples here

Customize your shade

Measurements

Width, plate to plate

Height

Fabric width: XX in

Standard cable length: XX in

I want longer cables

Fabric and colors

Fabric collection

Fabric color: none

Operation

What's the difference?

Manual

Raise/lower with a crank rod

Motorized

Raise/lower with remote control

+369,00 $

Control type

What's the difference?

Remote control Operated with the multi-channel remote control. Learn more

+72,00 $

Wi-fi bridge Control from your smartphone, with Alexa and Google Home. Learn more

+189,00 $

Solar panel Powers the motor with solar energy. Learn more

+189,00 $

Anemometer Wind sensor connected to the motor. Learn more

+189,00 $

Product details

Remote control outdoor roller shades

3.0

1 verified review

72,00 $

Features

Remote control for Maanta outdoor roller shades which allows you to control the opening and closing of the shade.

15 channels to control up to 15 motors
Reception distance > 200 yards*
Dimensions 5 1/8" x 1 3/4" x 3/8"
Long battery life > 2 years

Compatible with 12v Maanta motors, click here.

* The distance may vary depending on the obstacles between the remote and the receiver.

Discover the product

Product details

Wifi Bridge

189,00 $

Features

WifiBridge is an optional accessory that allows you to automate Maanta roller shades.

With this device all motorized outdoor roller shades can be controlled via Amazon Echo and Google Home.
It is also possible to create advanced scenarios through the IFTTT service.

You can finally open or close your blind freely in any preferred position.

The WifiBridge is an optional accessory and compatible with:

* It is possible to connect more than one vertical blind to a single WifiBridge device.

Discover the product

Product details

Solar panel for roller shades

189,00 $

Features

Solar panel for outdoor shades, modular accessory that can be added to recharge the motor of the outdoor roller shade.

It keeps the integrated battery of the awning motor charged so you don't have to charge it manually.
Small size (21.65 x 2.36 x 0.39 inches) and 39 inches long connection cable.
Wall mounting bracket included.

The panel is compatible with:

In the case of multiple roller shades, a solar panel is required for each motor.

*The full charge of the motor for vertical blinds takes about 2 days

Discover the product

Product details

Anemometer for roller shade

189,00 $

Features

The Maanta roller shade anemometer is an advanced sun and wind sensor that automatically controls the opening and closing of roller shades. With intelligent control that adapts to the rhythm of nature, this wind sensor ensures comfort in all weather conditions. Perfect for Easy Roll, Reef Roll and Easy Clear blinds with Maanta motor, it is easy to install and adapts to any outdoor space.

Wireless anemometer: remote control for intuitive operation
Reliable: automatically raise your blinds in case of strong winds
Installation: simple and straightforward

Compatible with motorised Easy Roll, Reef Roll and Easy Clear

Discover the product

Your custom roller shade

Enter your measurements and select the options you want to get a custom configuration.

Complete the configuration to add to cart

Order now and receive it by

with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product Overview

Tens-Flow Technology

Fabric stays taut even in the wind

When the wind picks up on the terrace, Toki's fabric stays taut thanks to Tens-Flow technology: two lateral cables, kept under tension by springs, guide it from top to bottom, while the weighted bottom bar keeps it perfectly straight. Toki withstands strong winds without damage. You can stop the awning halfway, raise it or lower it even while the air is moving: the fabric glides along the cables smoothly and evenly.

Tens-Flow Technology

Fabric stays taut even in the wind

Key Features

Bottom Bar

The fabric always hangs straight

The weighted bottom bar (approx. 3.6 lb per meter) keeps the fabric perfectly vertical and sits concealed inside a fabric pocket.

Operation

Glides smoothly and stops wherever you want

The wide slot in the bottom bar allows the fabric to glide without catching; a self-locking winder or motor holds it at any height.

Temperature

Up to 48 °F less

The fabric blocks the sun's heat outside and lets light through: verandas and living areas stay cool and bright.

Installation

Assembled one piece at a time

The top plate is split into two pieces to simplify installation: secure the bracket, mount the winch and roller, then close with the cover.

Optional

Solar-powered motor

The 12V battery motor recharges via solar panel: motorize the awning without running power cables outdoors.

Anchoring

Floor or wall mounted

The bottom anchor locks the tensioned cable in place and is designed to be fixed to the floor or to the wall.

Compare fabrics

Purishade®

Waterproof yet breathable polypropylene fabric, resistant to abrasion and traction, with long-lasting color and certified low environmental impact production.

Material: Polypropylene
Weight: 7.96 oz/sq yd
Colors: Ivory

Beige

Cloud

White

Graphite

Protection levels (from 0 to 5):

Sun: 5 out of 5
Heat: 4 out of 5
Rain: 5 out of 5
Cold: 2 out of 5
View: 5 out of 5

Download the technical datasheet for Purishade (PDF, opens in a new tab)

Craftsmen of the 21st Century

Every Toki is made in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, prepare the roller, end bar, and cables, and in just a few days the blind is ready to ship.

For the fabric, we use two technical textiles selected by the Maanta Style Center: Purishade®, waterproof and breathable; Braidd5®, micro-perforated. You can find the differences in the fabric guide.

Craftsmen of the 21st Century

What makes the difference

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

All inclusive

Direct from manufacturer to you

Hear what our customers have to say

Get inspired

Toki or Sengia Zip? Two ways to close a side

	Toki	Sengia Zip
Side guidance	Spring-tensioned cables	Zip guide rails
Fabric edges	Guided by the cables	Enclosed in the rails
Fabric	Purishade® or Braidd5®, in ten colors	Purishade® or Braidd5®, in ten colors
Operation	Manual or 12 V motor	Motorized, battery and solar panel included
Versions	Standard manual, standard motorized, custom	Standard motorized and custom motorized
Sizes	- Standard 98.4 in high in 12 widths - Custom up to 157.5 × 118.1 in	Up to 153.5 × 118.1 in
Where it works best	Pergolas, balconies and sunny windows	Pergolas to be closed on the sides

Everything you need: guides and instructions

Document / Video	Action
Installation, Use and Maintenance Manual - manual
Installation, Use and Maintenance Manual – Motorized

Technical sheet

Type	Outdoor roller shades, with cable guides, made to measure
Available sizes	Width 39 3/8"-157 1/2" · Height 39 3/8"-118" · Fabric up to 129 sq ft
Available fabrics	Waterproof Purishade® or breathable Braidd5®, 10 colors
Side guides	Ø 1/8" steel cables tensioned by springs
Frame	Anodized aluminum and AISI304 stainless steel
Operation	Manual with self-locking winch or 12V motor with solar-charged battery, your choice
Installation	Wall or ceiling mount; lower hooks on the floor or wall
Footprint when closed	About 4"-4 3/4"
Packaging	One package about 59" long
Warranty	2 years
Production	Designed and made in Italy in Gambellara, at the Maanta workshop

304 stainless steel plates

Bracket and cover, for wall or ceiling mounting

Ø 2.95 in aluminum
roller tube

In joined sections,

ships in a single package

Technical fabric

Waterproof Purishade® or

breathable Braidd5®, 10 colors

Spring-tensioned cables

Ø 0.12 in steel cables keep

the fabric taut at any height

Weighted bottom bar

About 1.1 lb per foot,

hidden in the fabric pocket

Bottom anchor

Locks the cable under tension,

on the floor or wall

Type	Outdoor roller shades, with cable guides, made to measure
Available sizes	Width 39 3/8"-157 1/2" · Height 39 3/8"-118" · Fabric up to 129 sq ft
Shape	Rectangular, square
Fabric width	About 4 1/8" less than the ordered width, on average 2" per side
Available fabrics	Purishade®: solution-dyed polypropylene, 8 oz/yd², waterproof, breathable (2,500 g/m²/24h), UPF 50+, Oeko-Tex Class 1 Braidd5®: 30% polyester and 70% PVC, 12.1 oz/yd², micro-perforated with 5% openness: it filters light and lets air through
Purishade® colors	White · Ivory · Beige · Cloud · Graphite
Braidd5® colors	White · Ivory · Graphite · Cloud/White · Grey/Black
Color retention	Over 85% of the color for 8-10 years (Purishade® and Braidd5®)
Structure
Winding shaft	Extruded 6060 aluminum, Ø 3", in jointed sections. No cassette: when the shade is rolled up, it stays visible
Bottom bar	6060 T5 aluminum, cylindrical Ø 1", in jointed sections with internal ballast (about 1.1 lbs/ft), slid into the bottom pocket of the panel. End cap with Maanta logo
Side guides	One Ø 1/8" steel cable per side, kept under tension by springs on the upper brackets and locked at the bottom in the lower hook
Supports and plates	AISI304 stainless steel. Two-piece top plate (support and cover). Bottom anchoring to floor or wall
Springs	Galvanized spring steel
Finishes	Natural silver anodized aluminum · Brushed stainless steel. Suitable for coastal areas
Power supply
Operation	Manual with self-locking winch or 12V motor with solar-charged battery, your choice
Manual operation	1:11 worm-gear winch, self-locking, self-lubricating and sealed · Folding anodized aluminum crank handle, about 47"-59" · Right or left side, your choice
Motor	12V tubular motor inside the winding shaft · 13 Nm torque · 13 rpm rotation speed, adjustable · Electronic limit switches · IP44, protected against water splashes
Motor charging	Solar panel or charger with external jack (accessory)
Cycles per charge	About 300
Stated motor lifespan	15,000-20,000 cycles
Controls	15-channel remote control · WiFi Bridge for smartphone, Alexa, Google Home and IFTTT · Wind sensor for automatic retraction
Packaging and warranty
Installation	Wall or ceiling mount with universal bracket. Not side-mounted, not recessed, not angled. Two mounting points with three anchors each, with no intermediate brackets
Footprint when closed	About 4"-4 3/4" from the mounting surface, brackets included
Weight	About 18-26 lbs in the 7'10" × 7'3" size
Packaging	One package about 59" long
What's in the box	Delivered unassembled. Bracket kit (support bracket and cover bracket) · Idler side kit (pin and bracket for winding shaft, O-ring, cotter pin, screws) · Fabric tensioning kit (upper cable clamp, spring holder, springs, cable locking cylinders, anchoring washers, cable cutter) · Bottom bar end caps · Winding shaft, fabric and weighted bottom bar · Side cords. Manual version: crank kit (1:11 crank gear, crank square drive and cap, screws) and folding crank handle. Motorized version: 12V motor in place of the crank kit.
Not included but required	Wall anchors, to be chosen based on your surface
Optional accessories	12V motor · Motor kit + remote control + solar panel · Motor kit + remote control + battery charger · Solar panel · Battery charger · 15-channel remote control · Wi-Fi Bridge · Wind sensor · Crank handle
Warranty	2 years
Production	Designed and made in Italy in Gambellara, at the Maanta workshop

Read Less -

Read More +

What you get with custom Toki

Roller tube in sections

Ø 2.95 in aluminum roller tube, divided into sections joined with connectors, so it fits in a single package.

Fabric and bottom bar

The fabric in the material and color you chose, plus the weighted bottom bar that slides into the pocket.

Installation kit

304 stainless steel plates, idler end, springs, cable clamps, bottom anchors, cords, cable cutter and hardware. Wall anchors are not included.

Depending on the version

1:11 winch with folding crank rod on the manual version; 12 V motor with built-in battery on the motorized version.

DIY installation

Follow the video guide

Need an installer?

We'll help you find a trusted professional in your area, at no extra cost.

FAQ

An exterior roller shade with the fabric guided by two side cables tensioned by springs. It mounts on the wall or ceiling, in a manual version with a crank gear or a motorized 12V version.

Toki is the next step up from Reef Roll. The cables are kept at constant tension by springs, the bottom bar is a weighted cylinder enclosed in the fabric that slides along the cable without catching, the stainless steel bracket works for both wall and ceiling, and the whole shade ships in a single package.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, mounted on the wall or ceiling. It can't be mounted sideways, inside a recess or at an angle.

Yes, you can order fabric samples and see the colors and fabrics in person.

The manual version is operated with the crank rod and stops at any height, with no power needed. The motorized version is controlled by remote or smartphone and recharges with the solar panel. You can also start with the manual version and motorize it later.

No, the anodized aluminum roller tube stays visible when the shade is rolled up. When closed, it projects about 4" to 4 3/4" from the wall or ceiling, brackets included.

An exterior roller shade with the fabric guided by two side cables tensioned by springs. It mounts on the wall or ceiling, in a manual version with a crank gear or a motorized 12V version.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, mounted on the wall or ceiling. It can't be mounted sideways, inside a recess or at an angle.

In the configurator, you can enter either the fabric size or the overall size of the shade. If you enter the overall size, keep in mind that the fabric will be about 4 1/8" narrower, on average 2" per side.

Yes, you can order fabric samples and see the colors and fabrics in person.

No, the anodized aluminum roller tube stays visible when the shade is rolled up. When closed, it projects about 4" to 4 3/4" from the wall or ceiling, brackets included.

A 1/8" steel cable runs along each side of the fabric. At the top, springs mounted on the brackets keep it under tension; at the bottom, it's locked into the bottom fixing, attached to the floor or wall: the fabric stays guided and taut all the way up and down.

Guided by the tensioned cables and weighted by the bottom bar, the fabric stays taut and doesn't flap, even when you stop it halfway. In strong wind, though, it should be rolled up: on the motorized version, the anemometer does this automatically when the wind exceeds the threshold.

Weighing about 1 lb per foot, it keeps the fabric vertical at all times. It's a 1" aluminum cylinder enclosed in a fabric pocket, so you can't see it, and it slides along the cable through a wide eyelet.

Purishade® is a solution-dyed, waterproof polypropylene: choose it if you also want to keep the space dry from rain. Braidd5® is a high-tenacity, micro-perforated technical fabric: it lets some air and water through, so the space behind it stays better ventilated in summer. Purishade® blocks over 98% of UV rays.

With the 15-channel remote, which controls up to fifteen shades, or from your smartphone with the WiFi Bridge, compatible with Alexa, Google Home and IFTTT. With the anemometer, the shade rolls itself up when the wind exceeds the threshold.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make installation easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear or motor, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

The assembly hardware is in the box. Wall anchors aren't included, for either the top plates or the bottom fixings: choose ones suited to the surface you're fixing the shade to, whether wall, ceiling or floor.

Yes, the shade is designed for DIY installation with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't installed together. Each shade needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the shade runs about 200 open-and-close cycles.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make installation easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

Yes, the shade is designed for DIY installation with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't installed together. Each shade needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the shade runs about 200 open-and-close cycles.

Two years of legal warranty, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the shade: wind damage beyond the operating limits isn't covered by the warranty. On the motorized version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Two years of legal warranty, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the shade: wind damage beyond the operating limits isn't covered by the warranty. On the motorized version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Inspiration zone

Share your Maanta moments with #mymaanta

Questions & Answers

Have questions about this product?

Don’t hesitate to ask!

Your questions will also help other users.

Ask a question

Alternatively, contact our customer service for personalized advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honored knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Discover how we work

Custom Toki Custom outdoor roller shade with cable guides

Customize your shade

Measurements

Fabric and colors

Operation

Manual

Motorized

Control type

Remote control outdoor roller shades

3.0

Features

Wifi Bridge

Features

Solar panel for roller shades

Features

Anemometer for roller shade

Features

Your custom roller shade

Product Overview

Fabric stays taut even in the wind

Fabric stays taut even in the wind

Key Features

The fabric always hangs straight

Glides smoothly and stops wherever you want

Up to 48 °F less

Assembled one piece at a time

Solar-powered motor

Floor or wall mounted

Compare fabrics

Purishade®

Braidd5®

Craftsmen of the 21st Century

Craftsmen of the 21st Century

What makes the difference

Hear what our customers have to say

Get inspired

Toki or Sengia Zip? Two ways to close a side

Everything you need: guides and instructions

Technical sheet

304 stainless steel plates

Ø 2.95 in aluminum roller tube

Technical fabric

Spring-tensioned cables

Weighted bottom bar

Bottom anchor

What you get with custom Toki

Roller tube in sections

Fabric and bottom bar

Installation kit

Depending on the version

DIY installation

Follow the video guide

Need an installer?

FAQ

FAQ

What is Toki?

What's the difference between Toki and Reef Roll?

Where can I install it?

Can I see the fabrics before I order?

Manual or motorized?

Does it have a cassette?

What is Toki?

What's the difference between Toki and Reef Roll?

Where can I install it?

How do I measure?

Can I see the fabrics before I order?

Manual or motorized?

Does it have a cassette?

How do the spring-tensioned cables work?

How does it handle wind?

What does the weighted bottom bar do?

What's the difference between Purishade® and Braidd5®?

How is the motorized version controlled?

How do the spring-tensioned cables work?

How does it handle wind?

What does the weighted bottom bar do?

What's the difference between Purishade® and Braidd5®?

How is the motorized version controlled?

Does it mount on the wall or the ceiling?

Why is the top plate in two parts?

Ø 2.95 in aluminum
roller tube

Where Italian tradition meets
modern innovation