Accessories for fixing poles and anchors for shade sails
The accessories we offer are specially selected and tested for the installation of Maanta poles and anchors. You can conveniently order everything you need to install your sail without having to run to the hardware store for the small bits and pieces.
From the threaded rods required for fixing pole bases or wall anchors, to the additional eyebolt for installing multiple sails to one pole. Take advantage of the collection of installation accessories for shade sails on this page to complete the list of equipment you need for your installation.
The Muscle x3 back tensioner is an accessory that will help to give additional stability to the Maanta shade sail poles.With this Muscle x3 kit it’s easy to provide strength and tension to counteract the frontal force of the sail tent.In this way we can increase stability and tension to the whole structure and make it more wind and rain resistant.The kit...
The threaded rods made of galvanized steel M12 have a length of 13 cm and are ideal for fixing the base plates of our poles Alu-Simple- and Ulisse.This complete set consists of:
4 threaded rods M12 with 13 cm length
4 washers
4 screw nuts
Perfect for all Maanta poles
The threaded rods made of galvanized steel M10 have a length of 12 cm and are ideal for fixing our wall plates .This complete set consists of: 4 threaded rods M10 with 12 cm length 4 washers 4 screw nuts
Perfect for all Maanta wall plates
Injection mortar and dispenser for the professional installation of wall-mountings and poles with threaded rods.
Good quality of the G2000 silicone gun is important when distributing products. The cartridge must be perfectly installed in the gun with the same mixing ratio. The thrust in the center of the bottom of the cartridge must be uniform and...
Injection mortar and dispenser for the professional installation of wall-mountings and poles with threaded rods.
The M-Plus chemical anchor is the ideal solution for fixing the base of poles or anchoring plates to the wall for shade sails using threaded rod kits. Our chemical anchor has no styrene component which makes it environmentally friendly.
High...
This practical Maanta accessory allows you to wrap up to 4 meters of 6mm nautical rope.It is very practical to keep the excess line resulting from Muscle kits in an orderly and aesthetic way.Made of 316 nautical steel, it is robust, design and very practical.It is compatible with both Alu-Simple poles (T-nut to anchor to the lane already included) and...
The Easy Lamp outdoor spotlight is a technical product with an impeccable construction but at the same time practical and aesthetically appreciable.It is made of sturdy aluminum obtained from a single block, has a power of 1200 lumens, is IP66 certified and arrives already wired: simply plug it into the socket and it will be able to immediately illuminate...
Carabiner in mirror-polished steel, without eye, with stainless steel spring for shade sails.Superior grade quality.Tested and guaranteed.Measurements:
Diameter Ø 6mm
Length 60mm
Height 9mm
Two-eye steel tensioner used as a tie-rod to regulate the tension of lines to which static loads are applied (anchoring and tensile structures).
Specially selected for shading sails, even large ones
Sturdy and resistant over time
Adjustable from 160 mm up to 255 mm
Work load: 160 kg according to test report UNI EN 10204 with safety factor 4...
Specially selected nautical rope for professional fixing of shade sails.
Soft, technical, resistant
Made in Italy
Available in different lengths and colors
Accessory easy to use
Excellent quality and low price
The Muscle x3 kit is the best wall anchor on the market because allows you to stretch any shade sail with great ease.The Muscle x3 wall anchoring kit includes
Sturdy square steel plate (3.7x3.7 inches), 2 D shackles, 1 pulley, 1 pulley with cam cleat, 13 feet of nautical rope
It guarantees a very high tension to the sail for greater resistance to wind and...
The Kit Muscle Pole x3 for poles includes
T-nut (useful x Alu Simple)
1 male eyebolt galvanized steel
nylon washer
2 D shackles
pulley
pulley with cam cleat
4 meters of nautical rope
It guarantees a very high tension to the sail for greater resistance to wind and waterIt can be installed in our Ulisse and Alu-SimplE poles .
Notice: Our products are...
Useful information on shade sail anchoring accessories: which threaded rods to choose?
The set of 4 pcs. threaded rods M10 - 12cm (Article-No.: 2030026) is ideal for installing our wall plates. The threaded rods are made of galvanised steel with a diameter of M10 and a length of 12cm. They are suitable for fixing our wall anchor plates; they are NOT suitable for installing poles.
This set includes:
4 threaded rods M10 with a length of 12cm
4 washers
4 screw nuts
They are compatible with the following Maanta wall kits:
The set of 4 pcs. threaded rods M12 - 13cm(Article-No.: 2030025) consists of 4 threaded galvanised steel rods of diameter M12 and length 13cm. They are suitable for fixing the base of Maanta poles (AluSimple and Ulisse) to the ground and the collars of Maanta poles to the wall.
The Maanta wall plates are specially designed to support the tension of a sun shade sail; they are larger than the standard plates sold on the market and have 4 holes. You therefore need 4 threaded rods per wall plate (one set consists of 4 threaded rods M10 12cm long and allows for the installation of one plate)
Yes, they are not included in the shade sail poles and anchor kits. This allows you to choose the appropriate threaded rod or dowel according to your needs.
Once the threaded rod has been inserted into the chemist, it is advisable to allow it to rest for at least 30 minutes. During this short time the chemist will harden. For optimal setting, 2 to 12 hours are a good time.
We recommend using a 14 mm drill bit and drilling about 15 cm deep. We recommend drilling the concrete plinth in a "funnel shape" so that the chemical will fill the hole completely.
For each Ulisse and Alu-simple pole with 75° base and 90° base you need 1 set of 4 threaded rods M12 x 13cm. Please note: 2 sets of 4 threaded rods M12 x 13cm are required for the pole Ulisse with wall mountings: a total of 8 threaded rods.
For the pole Ulisse you need a total of 8 threaded rods M12 - 13cm (2 sets of 4 - threaded rods M12 - 13cm). For the pole Alu-Simple you need a total of 4 threaded rods M12 13cm (1 Set 4 pcs - Threaded rods M12 - 13cm)
Yes, the silicone gun can be used for 150ml, 280ml and 300ml cartridges.
Yes, you can save money by choosing the kit that includes the gun and chemical anchor cartridges.
You need to login or create account
Save products on your wishlist to buy them later or share with your friends.
