Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades
Toki Clear Standard Sizes Manual: Clear Vinyl Roller Shades

Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Toki Clear Standard Sizes manual Clear vinyl outdoor roller shade with side cable guides

Toki Clear Standard Sizes manual is the clear vinyl outdoor roller shade, 8' 2 7/16" high, that we make in our own workshop in Italy. It encloses patios, porches and balconies and shelters them from rain and crosswinds, with no construction work.

  • Manual, with a self-locking winch: it glides smoothly and stops at any height.
  • Low-shrink crystal-clear vinyl: withstands heat and cold, stays clear and holds its size over time (shrinkage under 1%).
  • Tens-Flow technology: spring-tensioned cables and a weighted bottom bar; the shade drops straight and stays taut, even in the wind.
  • Minimalist design: decorative covers hide the technical components.
  • Cable tensioners mount to the floor or the wall.

You can add a motor later on.
Find the motorized version here.

Get fabric samples delivered to your door Order your samples here

Choose options

Size: 7'10" x 8'2" (width x height)
  4'11" x 8'2" (width x height)
  5'11" x 8'2" (width x height)
  6'7" x 8'2" (width x height)
  7'3" x 8'2" (width x height)
  7'10" x 8'2" (width x height)
  8'2" x 8'2" (width x height)
  8'6" x 8'2" (width x height)
  9'2" x 8'2" (width x height)
  9'10" x 8'2" (width x height)
  10'6" x 8'2" (width x height)
  11'2" x 8'2" (width x height)
  11'6" x 8'2" (width x height)

Total price

$ 999.00
truck
truck
Order now and receive it by 
with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product details

Crystal PVC panel

Stays transparent and doesn't shrink

When you close the veranda for the cold season, the panel must drop straight and cover exactly the space you measured. That's why Maanta's Centro Stile, our in-house style studio in Italy, selected a 18.43 oz/sq yd crystal PVC with shrinkage of less than 1%: it holds its dimensions over time and stays taut between the guide cables.

The transparency holds up too: if you fold or pinch the panel, no white marks appear, and over the years the PVC won't turn opaque. The view outside stays crystal clear.

Crystal PVC panel

Stays transparent and doesn't shrink

When you close the veranda for the cold season, the panel must drop straight and cover exactly the space you measured. That's why Maanta's Centro Stile, our in-house style studio in Italy, selected a 18.43 oz/sq yd crystal PVC with shrinkage of less than 1%: it holds its dimensions over time and stays taut between the guide cables.

The transparency holds up too: if you fold or pinch the panel, no white marks appear, and over the years the PVC won't turn opaque. The view outside stays crystal clear.

Key features

Operation
Bottom bar

The panel always hangs straight

The weighted bottom bar (approximately 3.6 lb per meter) keeps the panel vertical and glides along the cable through a wide loop.

Operation

Stops at any height

The 1:11 self-locking winch lets you turn the folding rod and keep the awning at any height — no stops, no electricity needed.

Tens-Flow Technology

Panel stays taut even in the wind

Two spring-tensioned cables guide the fabric all the way to the ground and keep it taut at every height.

Installation

Assembled one piece at a time

The top plate comes in two parts for easier installation: fix the bracket, mount the winch and roller, then close with the cover.

Operation
Optional

Can be motorized later

The 12V motor, sold as an accessory, replaces the winch: you can add motorization even after purchase, with solar charging.

Anchoring

Floor or wall mounting

The lower anchor locks the cable under tension and is designed to be fixed to the floor or the wall.

Discover the fabric

  • Clear transparent rolled-up panel

Clear®

Transparent PVC panel that protects against rain and wind while letting light through, and insulates from the cold. It withstands harsh weather, UV rays, and tearing between -10 and +158 °F, is soft to the touch, and free from harmful chemicals.

Material
PVC
Weight
625 g/m²
Color
Transparent

Protection levels (from 0 to 5):

  • Sun: 0 out of 5
  • Heat: 1 out of 5
  • Rain: 5 out of 5
  • Cold: 5 out of 5
  • View: 0 out of 5
Download the technical datasheet for Clear (PDF, opens in a new tab)

21st-century craftspeople

Every Toki Clear is made in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, prepare the roller, bottom bar, and cables, and in just a few days the blind is ready to ship.

If you are also considering a fabric panel, the differences compared to Purishade® and Braidd5® are explained in the fabric guide.

21st-century craftspeople

Every Toki Clear is made in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, prepare the roller, bottom bar, and cables, and in just a few days the blind is ready to ship.

If you are also considering a fabric panel, the differences compared to Purishade® and Braidd5® are explained in the fabric guide.

What makes the difference

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

Everything included

Direct from the manufacturer

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

Everything included

Direct from the manufacturer

Hear what our customers have to say

Get inspired

Toki Clear or Sengia Zip Clear? Two ways to close a side

Toki Clear

Sengia Zip Clear

Side guidance


Spring-tensioned cables


Zip guide rails

Screen edges

Guided by the cables

Enclosed in the rails

Screen

Transparent, low-shrinkage crystal-clear PVC

Transparent, low-shrinkage crystal-clear PVC

Operation

Manual or 12 V motor

Motorized, battery and solar panel included

Versions

Standard manual, standard motorized, custom

Standard motorized and custom motorized

Sizes

- Standard 98.4 in high in 12 widths

- Custom up to 157.5 × 118.1 in

Up to 153.5 × 118.1 in

Where it works best

Verandas and porches to enclose in winter

Pergolas and terraces to enclose while keeping the view

Everything you need: guides and instructions

Document / Video Action
Installation, Use and Maintenance Manual – Motorized

Technical datasheet

Type

Outdoor clear PVC roller shades with side cable guides, in standard sizes, manual version
Available sizes

Height 98 3/8", 12 widths from 59" to 137 3/4"
Panel

Clear low-shrink PVC, 0.02", shrinkage under 1%
Side guides

Ø 1/8" steel cables tensioned by springs
Frame

Anodized aluminum and AISI304 stainless steel
Operation

Self-locking winch with folding crank handle, can be motorized later
Installation

Wall or ceiling mount; lower hooks on the floor or wall
Footprint when closed

About 4"-4 3/4"
Packaging

One package about 59" long

Warranty

2 years
Production

Designed and made in Italy in Gambellara, at the Maanta workshop
toki-clear-std-man-img-inf

Stainless steel plates and
self-locking winch

304 stainless steel wall or

ceiling plates and 1:11 winch, operated

with the folding crank rod

Ø 2.95 in aluminum
roller tube

In joined sections,

ships in a single package

Crystal-clear PVC
with low shrinkage

Transparent, 0.02 in (20 mil),

shrinkage below 1%

Spring-tensioned cables

Ø 0.12 in steel cables keep

the screen taut at any height

Weighted bottom bar

About 1.1 lb per foot,

hidden in the screen pocket

Bottom anchor

Locks the cable under tension,

on the floor or wall

Aluminum intermediate bar

Divides the screen into sections, keeps it

taut and stops it from sagging.

Type

Outdoor clear PVC roller shades with side cable guides, custom-made
Available sizes

Height 98 3/8" · 12 widths: 59, 70 7/8, 78 3/4, 86 5/8, 94 1/2, 98 3/8, 102 3/8, 110 1/4, 118 1/8, 126, 133 7/8, 137 3/4 inches
Shape

Rectangular, square
Fabric width

About 4 1/8" less than the ordered width, on average 2" per side
Panel

Clear low-shrink PVC · Thickness 0.02" · 18.4 oz/yd² · Shrinkage under 1% · Waterproof
Over time

The clear PVC may yellow slightly after 5-7 years
Operating temperature

Do not operate below 41 °F: at low temperatures the PVC stiffens

Structure


Intermediate bar

Aluminum profile that divides the clear PVC panel into sections: it keeps the panel taut and prevents the PVC, heavier than fabric, from sagging
Winding shaft

Extruded 6060 aluminum, Ø 3", in jointed sections. No cassette: when the shade is rolled up, it stays visible
Bottom bar

6060 T5 aluminum, cylindrical Ø 1", in jointed sections with internal ballast (about 1.1 lbs/ft), slid into the bottom pocket of the panel. End cap with Maanta logo
Side guides

One Ø 1/8" steel cable per side, kept under tension by springs on the upper brackets and locked at the bottom in the lower hook
Supports and plates

AISI304 stainless steel. Two-piece top plate (support and cover). Bottom anchoring to floor or wall
Springs Galvanized spring steel
Finishes

Natural silver anodized aluminum · Brushed stainless steel. Suitable for coastal areas

Power supply


Operation

Self-locking winch with folding crank handle, can be motorized later
Manual operation

1:11 worm-gear winch, self-locking, self-lubricating and sealed · Folding anodized aluminum crank handle, about 47"-59" · Right or left side, your choice
Motor

Optional, sold separately: 12V tubular motor inside the winding shaft · 13 Nm torque · 13 rpm, adjustable · Electronic limit switches · IP44, protected against water splashes. Replaces the winch
Controls

Crank handle. With the optional motor: 15-channel remote control, WiFi Bridge, wind sensor

Packaging and warranty


Installation

Wall or ceiling mount with universal bracket. Not side-mounted, not recessed, not angled. Two mounting points with three anchors each, with no intermediate brackets
Footprint when closed

About 4"-4 3/4" from the mounting surface, brackets included
Weight

About 18-26 lbs in the 7'10" × 7'3" size
Packaging

One package about 59" long
What's in the box

Delivered unassembled. Gearbox kit (1:11 gearbox, gearbox bracket and cap, screws) · Bracket kit (support bracket and cover bracket) · Idle side kit (pin and plate for winding shaft, O-ring, cotter pin, screws) · Fabric tensioning kit (upper cable clamp, spring holder, springs, cable locking cylinders, anchoring washers, cable cutter) · Bottom bar end caps · Winding shaft, fabric and weighted bottom bar · Side cords · Aluminum intermediate support · Folding crank handle.

Not included but required

Wall anchors, to be chosen based on the surface
Optional accessories

12V motor · Motor kit + remote control + solar panel · Motor kit + remote control + battery charger · Solar panel · Battery charger · 15-channel remote control · Wi-Fi Bridge · Wind sensor · Crank handle
Warranty 2 years
Production

Designed and made in Italy in Gambellara, at the Maanta workshop

Read less -

Read more +

What you receive with Toki Clear standard manual

DIY installation

Watch the video guide

Need an installer?

We can help you find a trusted professional in your area, at no extra cost.

Find an installer

FAQ

FAQ

The version of Toki with a clear vinyl panel: an exterior roller shade guided by two spring-tensioned cables, for enclosing porches, verandas and balconies while letting light and views through.

Toki Clear is the next step up from Easy Clear. The cables are kept at constant tension by springs, the bottom bar is a weighted cylinder enclosed in the panel that slides along the cable without catching, and the stainless steel bracket works for both wall and ceiling.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, mounted on the wall or ceiling. It can't be mounted sideways, inside a recess or at an angle.

Toki Clear in Standard Sizes comes in twelve sizes, from 4' 11" × 8' 2 3/8" to 11' 5 3/4" × 8' 2 3/8": the height is always 8' 2 3/8", and the width ranges from 4' 11" to 11' 5 3/4". If you need another size, custom Toki Clear goes up to 13' 1 1/2" × 9' 10".

Yes, you can order fabric samples and see the colors and fabrics in person.

The manual version is operated with the crank rod and stops at any height, with no power needed. The motorized version is controlled by remote or smartphone and recharges with the solar panel. You can also start with the manual version and motorize it later.

No, the anodized aluminum roller tube stays visible when the shade is rolled up. When closed, it projects about 4" to 4 3/4" from the wall or ceiling, brackets included.

It's a 20-mil transparent vinyl weighing about 18 oz/yd², with less than 1% shrinkage: it holds its dimensions over time and stays taut between the cables.

Yes, the clear vinyl is waterproof and keeps rain out of the space. At the sides, the panel is guided by the cables rather than enclosed in rigid tracks, so when wind drives the rain sideways, a little water can get in at the edges.

A 1/8" steel cable runs along each side of the panel. At the top, springs mounted on the brackets keep it under tension; at the bottom, it's locked into the bottom fixing, attached to the floor or wall: the panel stays guided and taut all the way up and down.

It's the aluminum bar that divides the clear panel into sections. Vinyl is much heavier than fabric: the intermediate bar keeps it taut and stops it from sagging.

Guided by the tensioned cables and weighted by the bottom bar, the panel stays taut and doesn't flap, even when you stop it halfway. In strong wind, though, it should be rolled up: on the motorized version, the anemometer does this automatically when the wind exceeds the set threshold.

Yes, it's designed to enclose porches and verandas in the cold season. Below 41 °F, the vinyl stiffens: in those conditions, don't operate the shade and leave it where it is.

Weighing about 1 lb per foot, it keeps the panel vertical at all times. It's a 1" aluminum cylinder enclosed in a fabric pocket, so you can't see it, and it slides along the cable through a wide eyelet.

With the 15-channel remote, which controls up to fifteen shades, or from your smartphone with the WiFi Bridge, compatible with Alexa, Google Home and IFTTT. With the anemometer, the shade rolls itself up when the wind exceeds the threshold.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make installation easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

The assembly hardware is in the box. Wall anchors aren't included, for either the top plates or the bottom fixings: choose ones suited to the surface you're fixing the shade to, whether wall, ceiling or floor.

Yes, the shade is designed for DIY installation with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't installed together. Each shade needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the shade runs about 200 open-and-close cycles.

Two years of legal warranty, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the shade: wind damage beyond the operating limits isn't covered by the warranty. On the motorized version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Inspiration zone

Share your Maanta moments with #mymaanta

Questions & Answers

Have questions about this product?

Don’t hesitate to ask!

Your questions will also help other users.

Ask a question

Alternatively, contact our customer service for personalized advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honored knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Discover how we work
Maanta - Artigiani del XXI secolo