Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Toki Standard Sizes motorized Outdoor roller shade with side cable guides

Toki Standard Sizes motorized is the outdoor roller shade, 8' 2 7/16" high, that we make in our own workshop in Italy. It closes off one side of pergolas, porches and balconies, giving you shade and privacy.

  • 12V motor and solar panel included: it stops at any height and the battery recharges in the sun.
  • Tens-Flow technology: spring-tensioned cables and a weighted bottom bar; the fabric drops straight and stays taut, even in the wind.
  • Minimalist design: the bottom bar is concealed in a fabric pocket, and decorative covers hide the technical components.
  • Cable tensioners mount to the floor or the wall.
  • Waterproof Purishade® or breathable Braidd5® fabric, in ten colors.

Find the manual version here.

Get fabric samples delivered to your door Order your samples here

Choose options

Compatible accessories:

Remote Control
Remote Control
Details
+ $ 72,00

Total price

$ 1,189.00
truck
truck
Order now and receive it by 
with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product In-Depth

Tens-Flow Technology

Fabric stays taut even in the wind

When the wind picks up on the terrace, Toki's fabric remains taut thanks to Tens-Flow technology: two side cables, kept under tension by springs, guide it from top to bottom, and the weighted bottom bar keeps it perfectly straight. Toki holds up without damage even in strong winds. You can stop the awning halfway, raise or lower it even while the air is moving: the fabric glides along the cables smoothly and evenly.

Tens-Flow Technology

Fabric stays taut even in the wind

When the wind picks up on the terrace, Toki's fabric remains taut thanks to Tens-Flow technology: two side cables, kept under tension by springs, guide it from top to bottom, and the weighted bottom bar keeps it perfectly straight. Toki holds up without damage even in strong winds. You can stop the awning halfway, raise or lower it even while the air is moving: the fabric glides along the cables smoothly and evenly.

Key Features

Bottom Bar

The fabric always hangs straight

The weighted bottom bar (3.6 lb per meter approx.) keeps the fabric vertical and sits inside a fabric pocket, out of sight.

Operation

Glides smoothly and stops where you want

The wide slot in the bottom bar allows the fabric to glide without snagging; the motor stops it at the desired height.

Manovra
Temperature

Up to 16 °F less

The fabric blocks solar heat from the outside while letting light filter through: verandas and living areas stay cool and bright.

Installation

Assembled one piece at a time

The top plate comes in two pieces to make installation easier: secure the bracket then close with the cover.

Included

Solar-powered motor

The 12V battery motor recharges with the included solar panel: motorize the awning without running power cables outdoors.

Anchoring

Floor or wall mounted

The bottom anchor keeps the cable under tension and is designed to be fixed to the floor or to the wall.

Compare fabrics

Purishade®

Waterproof yet breathable polypropylene fabric, resistant to abrasion and traction, with long-lasting color and certified low environmental impact production.

Material
Polypropylene
Weight
7.96 oz/sq yd
Colors
  • Ivory
  • Beige
  • Cloud
  • White
  • Graphite

Protection levels (from 0 to 5):

  • Sun: 5 out of 5
  • Heat: 4 out of 5
  • Rain: 5 out of 5
  • Cold: 2 out of 5
  • View: 5 out of 5
Download the technical datasheet for Purishade (PDF, opens in a new tab)

Craftsmen of the 21st Century

Every Toki takes shape in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, prepare the roller, end bar, and cables, and in just a few days the blind is ready to ship.

For the fabric, we use two technical textiles selected by the Maanta Style Center: Purishade®, waterproof and breathable; Braidd5®, microperforated. The differences are explained in the fabric guide.

Craftsmen of the 21st Century

Every Toki takes shape in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, prepare the roller, end bar, and cables, and in just a few days the blind is ready to ship.

For the fabric, we use two technical textiles selected by the Maanta Style Center: Purishade®, waterproof and breathable; Braidd5®, microperforated. The differences are explained in the fabric guide.

What makes the difference

Fabric samples

DIY installation

Alexa and Google compatible

Free design consultation

All inclusive

From manufacturer to you

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

All inclusive

From manufacturer to you

Hear what our customers have to say

Get inspired

Toki or Sengia Zip? Two ways to close a side


Toki

Sengia Zip

Side guidance


Spring-tensioned cables


Zip guide rails

Fabric edges

Guided by the cables

Enclosed in the rails

Fabric

Purishade® or Braidd5®, in ten colors

Purishade® or Braidd5®, in ten colors

Operation

Manual or 12 V motor

Motorized, battery and solar panel included

Versions

Standard manual, standard motorized, custom

Standard motorized and custom motorized

Sizes

- Standard 98.4 in high in 12 widths

- Custom up to 157.5 × 118.1 in

Up to 153.5 × 118.1 in

Where it works best

Pergolas, balconies and sunny windows

Pergolas to be closed on the sides

Everything you need: guides and instructions

Document / Video Action
Installation, Use and Maintenance Manual – Motorized

Technical data sheet

Type

Outdoor roller shades, with cable guides, in standard sizes, motorized version

Available sizes

Height 98 3/8", 12 widths from 59" to 137 3/4"

Available fabrics

Waterproof Purishade® or breathable Braidd5®, 10 colors

Side guides

Ø 1/8" steel cables tensioned by springs

Frame

Anodized aluminum and AISI304 stainless steel

Motor

12V tubular motor, 13 Nm, built-in lithium battery, electronic limit switches

Charging

Solar panel included; jack charger sold separately

Controls

Remote control, WiFi Bridge and wind sensor, sold separately

Installation

Wall or ceiling mount; lower hooks on the floor or wall

Warranty

2 years

Production

Designed and made in Italy in Gambellara, at the Maanta workshop

toki-std-mot-img-inform

304 stainless steel plates

Bracket and cover, for wall or ceiling mounting

Ø 2.95 in aluminum
roller tube

In joined sections,

ships in a single package

12 V motor

Integrated motor with lithium

battery and solar charging

Technical fabric

Waterproof Purishade® or

breathable Braidd5®, 10 colors

Spring-tensioned cables

Ø 0.12 in steel cables keep

the fabric taut at any height

Weighted bottom bar

About 1.1 lb per foot,

hidden in the fabric pocket

Bottom anchor

Locks the cable under tension,

on the floor or wall

Type

Outdoor roller shades, with cable guides, in standard sizes, motorized version

Available sizes

Height 98 3/8" · 12 widths: 59, 70 7/8, 78 3/4, 86 5/8, 94 1/2, 98 3/8, 102 3/8, 110 1/4, 118 1/8, 126, 133 7/8, 137 3/4 inches

Shape

Rectangular, square

Fabric width

About 4 1/8" less than the ordered width, on average 2" per side

Available fabrics

Purishade®: solution-dyed polypropylene, 8 oz/yd², waterproof, breathable (2,500 g/m²/24h), UPF 50+, Oeko-Tex Class 1

Braidd5®: 30% polyester and 70% PVC, 12.1 oz/yd², micro-perforated with 5% openness: it filters light and lets air through

Purishade® colors

White · Ivory · Beige · Cloud · Graphite

Braidd5® colors

White · Ivory · Graphite · Cloud/White · Grey/Black

Color retention

Over 85% of the color for 8-10 years (Purishade® and Braidd5®)

Structure


Winding shaft

Extruded 6060 aluminum, Ø 3", in jointed sections. No cassette: when the shade is rolled up, it stays visible

Bottom bar

6060 T5 aluminum, cylindrical Ø 1", in jointed sections with internal ballast (about 1.1 lbs/ft), slid into the bottom pocket of the panel. End cap with Maanta logo

Side guides

One Ø 1/8" steel cable per side, kept under tension by springs on the upper brackets and locked at the bottom in the lower hook

Supports and plates

AISI304 stainless steel. Two-piece top plate (support and cover). Bottom anchoring to floor or wall

Springs Galvanized spring steel
Finishes

Natural silver anodized aluminum · Brushed stainless steel. Suitable for coastal areas

Power supply


Operation

12V motor with built-in lithium battery, recharged by the included solar panel

Motor

12V tubular motor inside the winding shaft · 13 Nm torque · 13 rpm rotation speed, adjustable · Electronic limit switches · IP44, protected against water splashes

Motor charging

Solar panel or charger with external jack (accessory)

Cycles per charge

About 300

Stated motor lifespan

15,000-20,000 cycles

Controls

15-channel remote control · WiFi Bridge for smartphone, Alexa, Google Home and IFTTT · Wind sensor for automatic retraction

Packaging and warranty


Installation

Wall or ceiling mount with universal bracket. Not side-mounted, not recessed, not angled. Two mounting points with three anchors each, with no intermediate brackets

Footprint when closed

About 4"-4 3/4" from the mounting surface, brackets included

Weight

About 18-26 lbs in the 7'10" × 7'3" size

Packaging

One package about 59" long

What's in the box

Delivered unassembled. Plate kit (support plate and cover plate) · Idle side kit (pin and plate for winding shaft, O-ring, cotter pin, screws) · Fabric tensioning kit (upper cable clamp, spring holder, springs, cable locking cylinders, anchoring washers, cutter) · End bar caps · Winding shaft, fabric and weighted end bar · Side cords · 12V motor with built-in battery, in place of the winch kit, and solar panel.

Not included but required

Wall anchors, to be chosen based on the surface

Optional accessories

15-channel remote control · Battery charger · Wi-Fi Bridge · Wind sensor

Warranty 2 years
Production

Designed and made in Italy in Gambellara, at the Maanta workshop

Read less -

Read more +

What you get with the standard motorized Toki

DIY installation

Follow the video guide

Need an installer?

We'll help you find a trusted professional in your area, at no extra cost.

FAQ

FAQ

An exterior roller shade with the fabric guided by two side cables tensioned by springs. It mounts on the wall or ceiling, in a manual version with a crank gear or a motorized 12V version.

Toki is the next step up from Reef Roll. The cables are kept at constant tension by springs, the bottom bar is a weighted cylinder enclosed in the fabric that slides along the cable without catching, the stainless steel bracket works for both wall and ceiling, and the whole shade ships in a single package.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, mounted on the wall or ceiling. It can't be mounted sideways, inside a recess or at an angle.

Toki in Standard Sizes is 8' 2 3/8" tall and comes in twelve widths, from 4' 11" to 11' 5 3/4". If you need another size, custom Toki goes up to 13' 1 1/2" × 9' 10".

Start from the space where you want to mount the shade and choose the standard width that fits: the instructions walk you through marking the plate positions from the center. The fabric is about 4 1/8" narrower than the width you order, on average 2" per side.

Yes, you can order fabric samples and see the colors and fabrics in person.

The manual version is operated with the crank rod and stops at any height, with no power needed. The motorized version is controlled by remote or smartphone and recharges with the solar panel. You can also start with the manual version and motorize it later.

No, the anodized aluminum roller tube stays visible when the shade is rolled up. When closed, it projects about 4" to 4 3/4" from the wall or ceiling, brackets included.

A 1/8" steel cable runs along each side of the fabric. At the top, springs mounted on the brackets keep it under tension; at the bottom, it's locked into the bottom fixing, attached to the floor or wall: the fabric stays guided and taut all the way up and down.

Guided by the tensioned cables and weighted by the bottom bar, the fabric stays taut and doesn't flap, even when you stop it halfway. In strong wind, though, it should be rolled up: on the motorized version, the anemometer does this automatically when the wind exceeds the set threshold.

Weighing about 1 lb per foot, it keeps the fabric vertical at all times. It's a 1" aluminum cylinder enclosed in a fabric pocket, so you can't see it, and it slides along the cable through a wide eyelet.

Purishade® is a solution-dyed, waterproof polypropylene: choose it if you also want to keep the space dry from rain. Braidd5® is a high-tenacity, micro-perforated technical fabric: it lets some air and water through, so the space behind it stays better ventilated in summer. Purishade® blocks over 98% of UV rays.

With the 15-channel remote, which controls up to fifteen shades, or from your smartphone with the WiFi Bridge, compatible with Alexa, Google Home and IFTTT. With the anemometer, the shade rolls itself up when the wind exceeds the threshold.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make installation easier: you fix the bracket to the wall or ceiling through the slots, mount the roller tube, motor and springs, and finish by closing it with the cover, secured with countersunk screws.

The assembly hardware is in the box. Wall anchors aren't included, for either the top plates or the bottom fixings: choose ones suited to the surface you're fixing the shade to, whether wall, ceiling or floor.

Yes, the shade is designed for DIY installation with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

No: the motor battery charges with the included solar panel, or with the jack charger, sold separately as an accessory.

No, it's sold separately, as is the WiFi Bridge: you need at least one of the two to operate the shade. One 15-channel remote controls up to fifteen shades: if you already have the one for Maanta exterior roller shades, you can use it for Toki too.

The included solar panel keeps it charged. When there isn't enough sun, you can recharge it with the jack charger, sold separately as an accessory.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the shade runs about 300 open-and-close cycles.

Two years of legal warranty, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the shade: wind damage beyond the operating limits isn't covered by the warranty. On the motorized version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Inspiration zone

Share your Maanta moments with #mymaanta

Questions & Answers

Have questions about this product?

Don’t hesitate to ask!

Your questions will also help other users.

Alternatively, contact our customer service for personalized advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honored knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Maanta - Artigiani del XXI secolo