Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Steel carabiner D70 Inox D70

Your shade sail's load ends here: the D70 snap hook clips in, holds and releases in a single move. Certified DIN 5299 Form C, available exclusively in stainless steel, with a load capacity of 550 lbs. Designed for those installing large shade sails or in environments where corrosion resistance is non-negotiable.

  • 550 lbs load capacity, DIN 5299 Form C certified: four times the D60, for high-load installations
  • Stainless steel only: for marine, humid, or continuously weather-exposed environments
  • Length 2 3/4", wire 1/4": a few extra millimeters where the geometry of the anchor point calls for it
  • Packs of 1, 2, 4 or 10: order exactly what you need, nothing more

Choose color and size

Single or Box: 1 Carabiners
  • 1 Carabiners
  • Box 2 Carabiners
  • Box 4 Carabiners
  • Box 10 Carabiners

Total price

$ 5.00 $ 5.00
truck
truck
Order now and receive it by 
with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Datasheet

Product Identification


Product Name

Stainless Steel Snap Hook for Shade Sails

Model

D70

Type

Spring snap hook, C-shape

Reference Standard

DIN 5299 C-shape

Available Materials


Stainless Steel

Corrosion-resistant, suitable for humid and marine environments. Polished finish.

Dimensions

Total length: 2 3/4"

Wire diameter: 9/32"

Performance


Working Load Limit

1,213 lbs

Closure Mechanism

Automatic spring-loaded latch, manual opening, automatic closing

Available Pack Sizes

1, 2, 4, 10 pieces

Maanta Compatibility


Compatible Shade Sails

Solaria Impermeabile, Solaria Traspirante, Solaria +Plus, EZ Breez Impermeabile, EZ Breez Traspirante, Furl, Solaria Lean, Bugna

Compatible Anchoring Systems

Eye-to-eye M6 stainless steel turnbuckles, Kit Parete EZ Wall Fix, Kit Parete Cima Nautica, Pali Alu Simple, Ulisse, EZ Mast, EZ Mast Inox

Not Compatible With

Kit Parete Muscle x3 (use the attachment system included in the kit)

Packaging & Warranty


Packaging

1 package, often included with the main order shipment

Weight

3/100 lbs each

Warranty

2 years

Read less -

Read more +

FAQ

FAQ

It connects the corners of your shade sail to the anchor points of your system: wall eyelets, tensioning rods, and pole tops. Compared to the D60, the D70 is designed for installations that require a significantly higher working load capacity — 1,213 lbs vs. 265 lbs — and is available exclusively in stainless steel.

It depends on the shape of your shade sail: a triangular sail uses 3 carabiners (one per corner), while a quadrilateral sail uses 4. If your shade sail has additional tensioning points, the number may increase. Reach out to our team for an accurate count based on your specific setup.

Yes, the DIN 5299 Form C carabiner is a widely used industry standard. If your shade sail's grommets and anchor points are compatible with a 70 mm carabiner, it will work with other systems as well. Always check the dimensions before purchasing.

Choose the D70 when the shade sail is large, the installation is permanent in a coastal area, or the anchor points are subject to high dynamic loads (strong wind, shade sails larger than 270–320 sq ft). For the vast majority of standard installations, the D60 at 265 lbs is more than sufficient.

DIN 5299 is the German industrial standard for spring snap hooks. "Form C" identifies the specific geometry: an open C-shaped body with a spring hook on the long side and a fixed eye on the other. This shape ensures proper load alignment and prevents accidental opening under tension.

The D70 is designed for installations that demand both high load capacity and long-lasting corrosion resistance. Stainless steel is the only material that consistently delivers both qualities.

550 lbs is the Working Load Limit, calculated with a safety factor relative to the minimum breaking strength specified by DIN 5299 standard.

No. The Wall Mounting Kit Muscle x3 includes a proprietary attachment system that is already built in. For all other Maanta wall kits (EZ Wall Fix, Wall Mounting Kit Nautical Rope), the D70 is fully compatible.

Press the spring hook downward with your thumb, insert the shade sail's eyelet into the opening, and release: the mechanism locks back automatically. To detach, press the hook again and slide the eyelet out. No tools required.

Made from stainless steel, the D70 requires minimal upkeep. Check the spring action once a season to make sure it moves smoothly. In coastal areas with heavy salt exposure, a quick rinse with fresh water at the end of the season will help extend the life of the mechanism.

The 2-year legal warranty covers manufacturing defects and non-conformity at the time of delivery. If the carabiner arrives with a faulty spring, structural deformations, or dimensions that don't match the stated specs, contact us and we'll replace it.

Report the damage to the carrier at the time of delivery, then contact our customer service team with photos of the damage and the packaging. We will arrange a replacement. If the damage is not visible on the outside, you still have time to let us know after opening the package.

Inspiration zone

Share your Maanta moments with #mymaanta

Questions & Answers

Have questions about this product?

Don’t hesitate to ask!

Your questions will also help other users.

Alternatively, contact our customer service for personalized advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honored knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Maanta - Artigiani del XXI secolo