New motorized retractable shade sail Zefira: save $300 now with code ZEFIRA300

Discover our fabrics! Order samples and feel the quality for yourself

We’ll tailor your project in just 5 days!

Play video
Reference

Anemometer for roller shade Sensor for automatic management of your blinds

The Maanta roller shade anemometer is an advanced sun and wind sensor that automatically controls the opening and closing of roller shades. With intelligent control that adapts to the rhythm of nature, this wind sensor ensures comfort in all weather conditions. Perfect for Easy Roll, Reef Roll and Easy Clear blinds with Maanta motor, it is easy to install and adapts to any outdoor space.

  • Wireless anemometer: remote control for intuitive operation
  • Reliable: automatically raise your blinds in case of strong winds
  • Installation: simple and straightforward
click

Compatible with motorised Easy Roll, Reef Roll and Easy Clear

-10% $169.00
$152.10
truck
truck
Order now and receive it 
with UPS Carbon Neutral

YOU CAN TRUST

  • garanzia

    Free design service

  • 1-milione-vendite

    Delivery 24 / 48 hours

  • aiuto-progettazione

    After-Sales Service

icon-stardard.svg

Reef Roll STANDARD SIZES
Take advantage of the convenience of standard
sizes, over 500 sizes immediately available!

Accessories

Reef Roll -- Standard Sizes

Roller Shade with Stainless Steel Wire Guides
539.1 $ 599 $
Discover

Reef Roll -- Custom Sizes

Outdoor Roller Shade with Stainless Steel Wire Guides
274.73 $ 305.26 $
Discover

Easy Clear -- Standard Sizes

Clear Vinyl PVC Roller Blind
449.1 $ 499 $
Discover

Easy Clear

Clear Vinyl PVC Roller Blind
638.62 $ 709.58 $
Discover

Motor Kit + Remote Control + Solar Panel

Motorization Kit for Awnings
539.1 $ 599 $
Discover
The sun/wind sensor for blinds that follows the harmony of nature

The Maanta blind anemometer

The Maanta wireless anemometer is an indispensable accessory to ensure maximum protection and durability of your roller shades. Designed to respond to weather conditions in real time, it combines advanced technology with ease of use.

The wind sensor automatically raises the blinds during intense gusts of wind, protecting fabric and structure.

The light sensor, on the other hand, lowers the blinds when the sun's intensity is high, improving the comfort of the interior.

Both sensors work independently and can be customised, allowing you to set wind parameters and exclude or reset the light control according to your needs.

The integrated solar panel makes the wireless anemometer completely independent of the power grid, ensuring reliable and sustainable operation.

Choose the Maanta anemometer for automatic, safe and worry-free management of your blinds.

UP WHEN WINDY

Automatic protection from gusts of wind

The wind sensor in Maanta's anemometer automatically raises the blinds when gusts exceed the programmed threshold, protecting fabric and structure. Configurable to wind intensity levels of up to 180 km/h (112 mph), it triggers precisely, ensuring safety on the windiest of days.

DOWN WHEN SUNNY

Guaranteed comfort on sunny days

The light sensor of Maanta's wireless anemometer automatically lowers the blinds when brightness exceeds the programmed threshold, reducing overheating of indoor spaces. Adjustable to intensity levels of up to 100 klux, it offers optimal comfort and flexibility, adapting itself to your needs.

WHY CHOOSE MAANTA ANEMOMETER

Integrated solar panel

It recharges the battery autonomously, reducing costs and environmental impact. It operates with no grid connection, ensuring continuous operation.

Wireless remote control

The anemometer is wireless and allows you to control the movement of your roller shades via radio, no wiring or specialised labour is required to install this device.

Advanced automatic control

It adapts the blinds to the weather: automatically rises them in strong wind, lowers them in bright light (more than 2 minutes continuous) and rises them again if brightness decreases.

Autonomous and continuous operation for complete protection

Maanta Anemometer: Intelligent Wind Control

The Maanta anemometer is designed to detect wind speed through 3 hemispherical cups mounted on horizontal arms. When the wind hits the cups, they begin to rotate, measuring the speed of the air mass. The device has a small LCD display that shows information about the system status and a rear section with a solar panel, which recharges the battery using solar energy.

It offers automatic awning management in this way:

  • Wind sensor: When the sensor detects a wind speed that exceeds the programmed level, the blind goes up automatically, remaining up for 8 minutes. If, during this time, the light sensor is active, the wind decreases and sunlight is detected, the blind goes down automatically.
  • Light sensor: If brightness exceeds the programmed level for more than 2 minutes, the system commands the blind to lower. This sensor is deactivated for 15 minutes; if the light dims in the meantime, the blind is automatically raised again.

The LCD display is activated by pressing any of the buttons (except the reset button), and automatically switches off after 30 seconds of inactivity while continuing to run the programme.

The battery is constantly monitored by the built-in system. If the voltage drops below 2 .7 V, a small battery icon lights up on the display, indicating a low charge. At that moment, the solar panel activates charging to ensure continuous operation. If necessary, the anemometer can also be recharged via the USB-C port located at its base.

Data sheet

ModelMaanta Anemometer
Overall weight9.87 oz
STRUCTURE
Included materialWireless anemometer, fixing screws, instructions
Material NOT included, but necessaryMotor, Maanta roller shade
Measures10 1/4 in x 3 1/2 in x 3 1/2 in
ColorWhite
CompatibilityCompatible roller shade models: Easy Roll, Reef Roll, Easy Clear
Compatible motors: compatible with motor 3021016 and kits 3021014, 3021002
TECHNICAL DETAILS
Operating temperature- 10 °C, + 60 °C / 14 °F, 140 °F
Radio frequency433.05- 434.79 MHz
VoltageDC 3.7 V
Light settingIntensity scale from 0 to 100 klux
The light sensor can be deactivated during configuration or reset for customised management
Wind settingIntensity scale from 0 to 180 km/h (112mph)
Display typeDisplay LCD
Charge typeBattery with solar-powered charging or via USB C in the base
PACKAGING AND WARRANTY
Packaging11 ¼ in x 5 ¼ in x 4 ¼ in
Warranty2 years

HOW TO INSTALL THE ANEMOMETER FOR ROLLER BLINDS

Installing the anemometer is simple and requires no specialised labour.

It can be easily fixed to the wall using the two screws with dowels included in the package.

To set it up, start by pairing the motor remote control, then set the high and low limits of the roller shade. Next, connect the remote control to the anemometer and configure the device.

You can download the complete PDF guide for a detailed explanation. If you need further support, our technical department is at your disposal.

FAQ

How to pair the anemometer with roller shades?

To pair the anemometer with the roller shades, start by pairing the remote control with the blinds' motors, configuring the high and low limits. Then, connect the remote control to the anemometer following the instructions, and finally, complete the configuration of the anemometer according to your preferences. Pairing only the motor and anemometer, without the remote control, is possible, but is strongly discouraged to ensure optimal and safe operation of the system.

Can a single anemometer be used to pair several roller shades?

Yes, a single anemometer can be used to control several roller shades, as it sends the same signal to all connected motors.

Do I need the motor to operate the anemometer?

To use the anemometer, a motorised blind must be purchased, as the device interacts directly with the motor of the blind to control its opening and closing.

After how many minutes of light exceeding the programmed level will the blind be lowered?

If the light intensity exceeds the programmed level for more than 2 minutes, the sensor sends the signal to lower the blind. The light sensor will remain inactive for the next 15 minutes. If the light intensity decreases during this period, the blind will automatically be raised again.

How is the wind alarm handled with the light sensor active?

When the anemometer detects a wind alarm, the blind will automatically go up. It will remain up for 8 minutes. If the wind calms down and the light sensor detects sun, the blind will automatically go down.

Can the light sensor be excluded?

Yes, the light sensor can be excluded at any time, even after it has been set. If you do not want the blind to lower automatically depending on brightness, you can simply set it to ‘0’ during configuration or deactivate it later (with reset button).

Where to place the anemometer for blinds?

We recommend installing the anemometer in an exposed position, preferably on the top of the blind or on a nearby wall, to ensure accurate wind detection.

How can I charge the anemometer?

The anemometer is equipped with a solar panel that independently charges the battery. It can also be charged via a USB-C port on the base of the device. (Power supply not included)

green-people green-planet green-tree

Thought
thinking about everything

Our dedication to environmental protection is evident in every aspect of our operations. We constantly strive to integrate sustainable practices, reducing our environmental impact and promoting the conservation of our ecosystem.

This commitment reflects our core values, which drive us to pursue a greener and more responsible future.

Find out what we believe in
ambiente-treedom