Applications · Indoor roller blinds

Where roller blinds are used, room by room

Reading time: 4 minutes

From one room to the next, what you need from a blind changes: darkness in the bedroom, as much light as possible in the kitchen, privacy in the bathroom. Here you'll find, room by room, the right fabric and operating system for Kyma and Recta roller blinds, with a link to the category where you can configure them.

BEDROOM

Roller blinds for the bedroom

In the bedroom, the blind's main purpose is to block out light. Blackout fabrics — Blend Blackout and Canvas Blackout — have a 0% Tv (Tv is the percentage of light that passes through the fabric): they let no light in, and at night nothing can be seen from outside. The back of the fabric is white and reflects sunlight, helping to reduce heat.

The Tv rating for all collections — blackout, filtering, and sheer — is available for comparison in the selection guide.

Compare fabrics in the selection guide

A sliver of light may come through the edges

The fabric blocks all light, but the blind does not seal the window completely. To reduce light seeping in at the sides, mount the blind as close to the window as possible.

In the children's room

The chain is only available if the blind is mounted at least 6' 6" from the floor: this is a safety requirement for children. Lower down, choose the battery motor, which has no chain and can be operated with the remote control or from your smartphone via the WiFi Bridge. The motor is silent, under 35 dB.

Blackout fabrics

Blend Blackout in 5 colors and Canvas Blackout in 3. With a 0% Tv rating, the fabric lets no light through, regardless of color.

View blackout blinds

Battery motor

It recharges via a USB-C cable and delivers hundreds of open and close cycles on a single charge. It can be operated with the remote control, the WiFi Bridge, or both.

View motorized blinds

KITCHEN

Roller blinds for the kitchen

In the kitchen, you usually need as much light as possible. The sheer fabrics Satin, Brush, and Diamond let through 20% to 49% of light: during the day they act as a filter between the room and the outside, while in the evening, with the lights on, the interior is visible from outside.

If the window faces the street or other buildings, choose a filtering fabric: light enters diffused and in the evening, with the lights on, only silhouettes are visible from outside, not a sharp image. To clean the fabric, simply use a damp cloth.

Filtering fabric in the dining area

Sheer fabric in the dining area

LIVING ROOM

Roller shades for the living room

In the living room, windows are often large and the shade is visible from across the entire room. To keep the room bright, choose a sheer fabric. If the living room faces west, a filtering fabric lets in diffused light without glare.

Sheer fabric in the living room

Filtering fabric in the living room

The visible headrail

The headrail is the side profile that covers the mechanism, and in the living room it becomes part of the décor. Kyma and Recta share the same fabrics and dimensions: what changes is the headrail design. Each comes in two widths, Standard and Slim, and in six colors, and closes with a magnetic system that conceals the screws. The bottom rail matches the color of the headrail.

Kyma

Concave wave headrail, for interiors with soft, curved furnishings.

Recta

Straight-line headrail with 90° angles, for interiors with clean geometric shapes.

BATHROOM

Roller shades for the bathroom

In the bathroom, the blind must shield the view from outside while allowing daylight to filter in. For this environment, filtering fabrics are the most suitable choice: in the evening, with the lights on, only silhouettes are visible from outside, not a clear image. The three collections do not let through the same amount of light: through Earth, with an Openness Factor ranging from 6% to 16%, the outside can be glimpsed, while Fine Line is the most transparent to the view.

Sheer fabrics, in the evening with the lights on, allow a clear view inside.

  • If the window is visible from outside, choose Earth.
  • If the window is not exposed to view, you can also choose Horizon or Fine Line, which let through more light.
  • If in the evening you don't want even a silhouette to be visible from outside, choose a blackout fabric.

In the bathroom as well, the fabric can be cleaned with a damp cloth.

View the filtering blinds

FRENCH DOORS

Roller blinds for French doors and sliding doors

Kyma and Recta are made to measure from 1' 11" to 9' 2" in final width, brackets included, and from 11" to 9' 10" in height: they also cover French doors and sliding doors. They can be wall- or ceiling-mounted and are available in all fabrics.

For a multi-panel French door, the Maanta Style Center — which selects fabrics, brackets, and blind colors — recommends one blind per panel. The brackets of two side-by-side blinds can also be mounted directly adjacent to each other.

Leave clearance above the headrail

With the fabric fully rolled up, the blind takes up 4" in height, brackets and bottom rail included. If wall-mounted, at least 4" of free wall space is required above the headrail.

In the configurator you can enter either the fabric width or the final width, brackets included. How to measure is explained step by step in the measurement guide.

Read the measurement guide

SIDE-BY-SIDE BLINDS FOR FRENCH DOORS

OFFICE AND STUDY

Roller blinds for office and study

In front of a screen, you need light that doesn't reflect on the monitor. Filtering fabrics allow diffused daylight to enter without glare, making them the ideal choice for offices and workstations with screens.

If you have more than one window, consider a motor: a single multi-channel remote control operates up to 15 blinds, and with the WiFi Bridge you can control them from the app on your smartphone or by voice with Alexa and Google Home.

Motorized blinds for the office

Filtering blind for the home office

BUYING GUIDE

Compare fabrics, brackets, and operating systems

In the buying guide you will find all eight fabric collections compared side by side, with the openness factor and available colors for each one. You will also find the six bracket colors, with the combinations recommended by the Maanta Style Center, and the differences between chain and motor operation.

Frequently asked questions

TOPIC (ADD ONE PER EACH SECTION OF THE GUIDE)

Accordion #1
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Accordion #2
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Frequently asked questions

FAQ

Almost. Blend Blackout and Canvas Blackout have a Tv of 0%: the fabric blocks all light, whether it's light or dark in color. But the shade doesn't seal the window completely, and a few rays can slip through the gap between the fabric and the window. To reduce this, mount the shade as close to the window as possible.

It depends on how high you mount the shade. The chain is only available if you mount it at least 6' 6 3/4" off the floor: it's a child-safety rule. Below that, choose the battery motor. It has no chain, runs quietly (under 35 dB) and works with the remote control or from your smartphone with the WiFi Bridge. If you choose the chain now, you can still motorize the shade later.

A light-filtering one. The sheer fabrics Satin, Brush and Diamond let through 20% to 49% of the light, but in the evening, with the lights on, people can see in from outside. With a light-filtering fabric, the light comes in diffused, and in the evening only silhouettes show from outside, not a clear image. Whichever fabric you choose, a damp cloth is all it takes to clean it.

Only the design of the plate, the side profile that covers the mechanism: Kyma has a concave wave, Recta straight lines and 90° corners. The fabrics, sizes and operating options are the same. The plate width, Standard or Slim, is also an aesthetic choice: both versions have the same structure and the same strength. For the color, start with the fabric: Centro Stile Maanta – our in-house style office in Italy – recommends plates for each fabric, and you'll find them marked with a heart in the configurator. Fabric, colors and plate don't affect the price.

They can see silhouettes, not a clear image, when the lights are on inside. The three light-filtering collections don't screen equally: little shows through Earth, while Fine Line is the most see-through. If you want nothing to show from outside at night, choose a blackout fabric: Blend Blackout and Canvas Blackout don't let light through.

From 23 5/8" to 9' 2" overall width, plates included, and from 11 7/8" to 9' 10" in height. In the configurator, you can enter the fabric width or the overall width with plates: either way, you'll see the overall width right away. Our measuring guide walks you through how to measure, step by step.

If you mount the shade on the wall, at least 4 1/8" of clear wall above the frame: that's the height the shade takes up with the fabric fully rolled, plate and bottom bar included. The same plate can also go on the ceiling: it has a mounting point on the back for the wall and one on top for the ceiling.

With the battery motor. The multi-channel remote comes already paired with the motor, controls up to 15 shades and works by radio, with no Wi-Fi and no app. The WiFi Bridge connects to your router and lets you control the shades from the app on your smartphone and by voice with Alexa and Google Home. You can also use both: the remote when you're in the room, the app or your voice when you're somewhere else.

Almost. Blend Blackout and Canvas Blackout have a Tv of 0%: the fabric blocks all light, whether it's light or dark in color. But the shade doesn't seal the window completely, and a few rays can slip through the gap between the fabric and the window. To reduce this, mount the shade as close to the window as possible.

It depends on how high you mount the shade. The chain is only available if you mount it at least 6' 6 3/4" off the floor: it's a child-safety rule. Below that, choose the battery motor. It has no chain, runs quietly (under 35 dB) and works with the remote control or from your smartphone with the WiFi Bridge. If you choose the chain now, you can still motorize the shade later.

A light-filtering one. The sheer fabrics Satin, Brush and Diamond let through 20% to 49% of the light, but in the evening, with the lights on, people can see in from outside. With a light-filtering fabric, the light comes in diffused, and in the evening only silhouettes show from outside, not a clear image. Whichever fabric you choose, a damp cloth is all it takes to clean it.

Only the design of the plate, the side profile that covers the mechanism: Kyma has a concave wave, Recta straight lines and 90° corners. The fabrics, sizes and operating options are the same. The plate width, Standard or Slim, is also an aesthetic choice: both versions have the same structure and the same strength. For the color, start with the fabric: Centro Stile Maanta – our in-house style office in Italy – recommends plates for each fabric, and you'll find them marked with a heart in the configurator. Fabric, colors and plate don't affect the price.

They can see silhouettes, not a clear image, when the lights are on inside. The three light-filtering collections don't screen equally: little shows through Earth, while Fine Line is the most see-through. If you want nothing to show from outside at night, choose a blackout fabric: Blend Blackout and Canvas Blackout don't let light through.

From 23 5/8" to 9' 2" overall width, plates included, and from 11 7/8" to 9' 10" in height. In the configurator, you can enter the fabric width or the overall width with plates: either way, you'll see the overall width right away. Our measuring guide walks you through how to measure, step by step.

If you mount the shade on the wall, at least 4 1/8" of clear wall above the frame: that's the height the shade takes up with the fabric fully rolled, plate and bottom bar included. The same plate can also go on the ceiling: it has a mounting point on the back for the wall and one on top for the ceiling.

With the battery motor. The multi-channel remote comes already paired with the motor, controls up to 15 shades and works by radio, with no Wi-Fi and no app. The WiFi Bridge connects to your router and lets you control the shades from the app on your smartphone and by voice with Alexa and Google Home. You can also use both: the remote when you're in the room, the app or your voice when you're somewhere else.

Almost. Blend Blackout and Canvas Blackout have a Tv of 0%: the fabric blocks all light, whether it's light or dark in color. But the shade doesn't seal the window completely, and a few rays can slip through the gap between the fabric and the window. To reduce this, mount the shade as close to the window as possible.

Almost. Blend Blackout and Canvas Blackout have a Tv of 0%: the fabric blocks all light, whether it's light or dark in color. But the shade doesn't seal the window completely, and a few rays can slip through the gap between the fabric and the window. To reduce this, mount the shade as close to the window as possible.

It depends on how high you mount the shade. The chain is only available if you mount it at least 6' 6 3/4" off the floor: it's a child-safety rule. Below that, choose the battery motor. It has no chain, runs quietly (under 35 dB) and works with the remote control or from your smartphone with the WiFi Bridge. If you choose the chain now, you can still motorize the shade later.

A light-filtering one. The sheer fabrics Satin, Brush and Diamond let through 20% to 49% of the light, but in the evening, with the lights on, people can see in from outside. With a light-filtering fabric, the light comes in diffused, and in the evening only silhouettes show from outside, not a clear image. Whichever fabric you choose, a damp cloth is all it takes to clean it.

Only the design of the plate, the side profile that covers the mechanism: Kyma has a concave wave, Recta straight lines and 90° corners. The fabrics, sizes and operating options are the same. The plate width, Standard or Slim, is also an aesthetic choice: both versions have the same structure and the same strength. For the color, start with the fabric: Centro Stile Maanta – our in-house style office in Italy – recommends plates for each fabric, and you'll find them marked with a heart in the configurator. Fabric, colors and plate don't affect the price.

They can see silhouettes, not a clear image, when the lights are on inside. The three light-filtering collections don't screen equally: little shows through Earth, while Fine Line is the most see-through. If you want nothing to show from outside at night, choose a blackout fabric: Blend Blackout and Canvas Blackout don't let light through.

From 23 5/8" to 9' 2" overall width, plates included, and from 11 7/8" to 9' 10" in height. In the configurator, you can enter the fabric width or the overall width with plates: either way, you'll see the overall width right away. Our measuring guide walks you through how to measure, step by step.

If you mount the shade on the wall, at least 4 1/8" of clear wall above the frame: that's the height the shade takes up with the fabric fully rolled, plate and bottom bar included. The same plate can also go on the ceiling: it has a mounting point on the back for the wall and one on top for the ceiling.

With the battery motor. The multi-channel remote comes already paired with the motor, controls up to 15 shades and works by radio, with no Wi-Fi and no app. The WiFi Bridge connects to your router and lets you control the shades from the app on your smartphone and by voice with Alexa and Google Home. You can also use both: the remote when you're in the room, the app or your voice when you're somewhere else.